AIRTECH FABRICATORS
5029 W. PARKVIEW LN.
GLENDALE AZ 85310
TO PLACE A ORDER CALL
1-888-814-2288 or 623-587-9540 or FAX 623-587-9639
airtech1dashvisor@cox.net
|
GL 1500
|
|
|
|
----------LINKS----------
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shade your gauges so they are easier to read. Protect your instrument panel from the sun and heat. Made out of 1/8” ABS, the same material as the Honda dash. Snaps into existing Honda Dash.
|
DASH VISOR PATENT # D45628
INSTRUCTIONS: READ CAREFULLY
Hold the visor in front of the instrument panel, place the two bottom sides of the visor in each side of the instrument panel at the bottom. Now raise the visor up so the center tab touches the edge of the center of the dash. Push down in front of the center tab so it is lower than the lip of the dash, than push the visor in until the center tab snaps in place. It goes in hard, so just push it in. Then you can move the visor back and forth until it is level with the top of the dash.
NOTE: If you have the wood dash and it is on the bottom edge where the dash visor rest you need to cut some of the dash visor off. See diagram below
RUN YOUR MOUSE OVER THE PICTURE.
Below
|
 |
|
 |
 |
 |
|
|
|
TRIM HERE
|
|